The Bat-Pac Battery Eliminator
Eliminate the need
for a battery for many
ATV Scooter Snowmobile
If your application has an
electric starter, you will lose that function
THE Bat-Pac WAS DEVELOPED BECAUSE OF A FEW PROBLEMS WITH MANY CHARGING
in most Motorcycle, ATV, ATC, Scooter, Snowmobile; rely on a good
before the charging system can work properly and to its designed
Overloading the charging systems components by the use of a weak or
dead battery is a common problem.
Extremely low charge conditions from a weak or dead battery can draw
enormous amounts of current in order
to bring the battery up to a charged state. Vibration and extreme
conditions can also damage a battery internally
by shorting-out the plates within a battery, this will cause an
excessive current draw. Excessive voltage outputs
from the charging system are also likely if running without a battery,
or using a battery with low or no fluid (electrolyte).
Repairs from excessive current draw, or excessive voltage output
usually require an expert's trouble shooting skills,
and the replacement of expensive electronic components including but
not limited to the regulator, rectifier, stator,
armature, and CDI.
Replace that heavy, unreliable, environmentally destructive, lead acid
The Bat-Pac weights in at 2.5 ounces. Size is 1x1x2.5" (Aluminum case
better at idle, and more stable and cleaner at all R.P.M.'s
The Headlight is brighter at idle, than with a good battery on most
The Bat-Pac is maintenance free, and has a Lifetime Replacement
The Bat-Pac is built to endure extreme conditions and temperatures
of +105C / +221F.